Volume 13
Issue 7
IEEE/CAA Journal of Automatica Sinica
| Citation: | J. Ma, J. Wei, and X. Wang, “Intelligent fault diagnosis of rolling bearing with variable speed based on ASTFrFT and time-frequency BoTNet model,” IEEE/CAA J. Autom. Sinica, vol. 13, no. 7, pp. 1761–1763, Jul. 2026. doi: 10.1109/JAS.2025.125264 |
| [1] |
C. Sun, H. Yin, Y. Li, and Y. Chai, “A novel rolling bearing vibration impulsive signals detection approach based on dictionary learning,” IEEE/CAA J. Autom. Sinica, vol. 8, no. 6, pp. 1188–1198, Jun. 2021. doi: 10.1109/JAS.2020.1003438
|
| [2] |
Z. Wang, J. Yang, and Y. Guo, “Unknown fault feature extraction of rolling bearings under variable speed conditions based on statistical complexity measures,” Mechanical Systems and Signal Processing, vol. 172, no. 1, pp. 1–29, Jun. 2022.
|
| [3] |
H. Geng, Y. Peng, L. Ye, and Y. Guo, “Generalized broadband mode decomposition method and its application in fault diagnosis of variable speed spherical roller bearing,” Measurement, vol. 208, Art. no. 112450, Feb. 2023. doi: 10.1016/j.measurement.2023.112450
|
| [4] |
Y. Gang, “A concentrated time-frequency analysis tool for bearing fault diagnosis,” IEEE Trans. Instrumentation and Measurement, vol. 69, no. 2, pp. 371–381, Mar. 2019.
|
| [5] |
B. Sun, H. Li, C. Wang, K. Zhang, and S. Chen, “Current-aided dynamic time warping for planetary gearbox fault detection at time-varying speeds,” IEEE Sensors J., vol. 24, no. 1, pp. 390–402, Jan. 2024. doi: 10.1109/JSEN.2023.3328116
|
| [6] |
J. Guo, G. Hao, J. Yu, P. Wang, and Y. Jin, “A novel solution for improved performance of time-frequency concentration,” Mechanical Systems and Signal Processing, vol. 185, Art. no. 109784, Feb. 2023. doi: 10.1016/j.ymssp.2022.109784
|
| [7] |
A. Catherall and D. Williams, “High resolution spectrograms using a component optimized short-term fractional Fourier transform,” Signal Processing, vol. 90, no. 5, pp. 1591–1596, May. 2010. doi: 10.1016/j.sigpro.2009.11.004
|
| [8] |
M. Awal, S. Ouelha, S. Dong, and B. Boashash, “A robust high-resolution time-frequency representation based on the local optimization of the short-time fractional Fourier transform,” Digital Signal Processing, vol. 70, pp. 125–144, Nov. 2017. doi: 10.1016/j.dsp.2017.07.022
|
| [9] |
S. Liu, C. Liu, Y. Wu, S. Liu, and W. Liu, “Tacholess order tracking method based on STFrFT for fault diagnosis of wind turbine gearbox under variable operating conditions,” IEEE Trans. Instrumentation and Measurement, vol. 73, pp. 1–11, Mar. 2024.
|
| [10] |
C. Liu, S. Liu, Y. Wu, S. Liu, W. Liu, and Z. Wang. “Identification and instantaneous frequency estimation of effective vibration signal for pitch gearbox,” IEEE Sensors J., vol. 24, no. 18, pp. 29086−29096, Sep. 2024.
|
| [11] |
I. Bello, B. Zoph, A Vaswani, J Shlens, and Q. Le, “Attention augmented convolutional networks,” in Proc. IEEE/CVF Int. Conf. Computer Vision, 2019, pp. 3286−3295.
|
| [12] |
A. Srinivas, T. Lin, N. Parmar, J. Shlens, P. Abbeel, and A. Vaswani, “Bottleneck transformers for visual recognition,” in Proc. IEEE/CVF Conf. Computer Vision and Pattern Recognition, 2021, pp. 16519−16529.
|
| [13] |
W. Chen, Z. Wang, H. Xie, and W. Yu, “Characterization of surface EMG signal based on fuzzy entropy,” IEEE Trans. Neural Systems and Rehabilitation Engineering, vol. 15, no. 2, pp. 266–272, Jun. 2007. doi: 10.1109/TNSRE.2007.897025
|